High Resolution
VGA/DVI Graphics Controller
for PMC, CompactPCI (CPCI), and PCI
 

• Very High Performance 128-bit Graphics 2D/3D/OpenGL/DirectX Accelerator
• OpenGL 1.1 rendering in hardware 128-bit drawing engine
• 16 MB or 32 MB SGRAM
• PMC, CompactPCI, and PCI versions
• Quad-image VGA/DVI and FCode BIOS
• CompactPCI version supports Front Panel or Rear Panel I/O and 3U or 6U panels
• Designed for extended product life-cycle requirements
• Drivers for Solaris 2.6 - 10
• Drivers for Windows 2K/XP
• SDL Support for VxWorks and LynxOS
• WindML Support for VxWorks
• X and SDL support for Linux
  

Download Eclipse3 Family Datasheet

Request Eclipse3 Family Manual

Eclipse3CPCI Version

Eclipse3CPCI Rear-Panel
I/O Transition Module

Optional CompactPCI Rear-Panel I/O
transition module with VGA & DVI-I
rear panel connections. Not available
 with Front-Panel VGA connector
configuration.
 

Rastergraf's Eclipse3 family of PMC, CompactPCI (CPCI), and PCI boards fulfills high performance requirements for graphics common to embedded computing processing environments, including Solaris, Linux, Windows, and leading real-time operating systems including VxWorks and LynxOS.

Using a 128-bit Borealis graphics accelerator, the Eclipse3 supports 2D, 3D, OpenGL, and DirectX compatible displays.  Monitor support includes non-interlaced analog VGA and Sync-On-Green (SOG) plus optional digital DVI with screen resolutions up to 1920 x 1200 (VGA) or 1600 x 1200 (DVI) with up to 16.7 million colors (24 bpp). A quad-image BIOS enables the Eclipse3 to operate in virtually any x86 or SPARC system using VGA, RGB+Sync-On-Green, or DVI displays.

The Eclipse3PMC is available either with a front-panel VGA or DVI-I (DVI+VGA) connector. It can be ordered with an on-board 3.3V regulator for systems that do not supply 3.3V to the backplane.

The Eclipse3PCI is available either with a front-panel VGA or with both VGA and DVI-I (DVI+VGA) connectors. It can be ordered with an on-board 3.3V regulator for systems that do not supply 3.3V to the backplane.

The Eclipse3CPCI is available either with a front-panel VGA or with both VGA and DVI-I (DVI+VGA) connectors.

The Eclipse3CPCI can be configured for rear-panel I/O, in which case included is a small mating module with DVI and VGA connectors for the CPCI I/O area. Also, the Eclipse3CPCI and the rear I/O module (if used) can be ordered with either 3U or 6U panels.

Eclipse3PCI Version